=====Shapeoko 3 feeds and speeds=====

Hi there,

Write your feeds and speeds, DOC, lubrification type, tool used, name and date for each material.

=)



====[Acrylic]====


  * FEED 35 IPM, PLUNGE 15 IPM, SPEED 7800 RPM, DOC 0.5mm, LUB : OIL, TOOL : 1/4 2 FLUTES, **Greg**, 30 JUIN 2017

====[Aluminum]====
  * FEED 30 IPM, PLUNGE 10 IPM, SPEED 16000 RPM, DOC 0.02", LUB : EAU, TOOL : 1/8 2 FLUTES, **Pipo**, 11 JUILLET 2017
  * FEED 25.4 IPM, PLUNGE ?, SPEED ?, DOC 0.006", LUB : NOTHING, TOOL : 2 FLUTES, https://www.youtube.com/watch?v=94Ly1zH37wQ , 8 AVRIL 2016

====[Hdpe]====

====[Bois]====