Adding sharing folders in Linux Mint XFCE

Anonymous (anonymous@undisclosed.example.com) — 2018-01-28T18:11:25+00:00

animated_gif_with_sponsors

Anonymous (anonymous@undisclosed.example.com) — 2017-12-14T16:12:21+00:00

---------- * I create a 1600*1200 document in inkscape. * I put this in background * I put guides around page and white square * I import each logo on one layer, center, and make sure it is inside white square size * File>export>png image, for each layer. Select

antimony

Anonymous (anonymous@undisclosed.example.com) — 2018-08-19T08:02:54+00:00

Q: Can it be compiled for Windows? A: Windows doesn’t exist in the parallel universe. Sorry. ---------- Antimony doesn't deliver (yet) a binary for GNU/Linux. You'll have to build it yourself. I did a build for Debian 64bit which may work for any derivative as well. You can get it

Arc welding

Anonymous (anonymous@undisclosed.example.com) — 2017-08-06T15:19:10+00:00

Arc welding STEVE BLEILE DVD (ENGLISH)

bela_portable_modular

Anonymous (anonymous@undisclosed.example.com) — 2018-08-14T20:57:32+00:00

Bela Portable Modular arduino nano v4 + ethernet shield 10.91$ free ship (1 per module) beagle bone black 90$ local (1 per instrument) bela 70 pounds + ship (1 per instrument)

Benjolin

Anonymous (anonymous@undisclosed.example.com) — 2020-02-17T20:08:57+00:00

Benjolin Note : Synth DIY is about hunting for information in the internet jungle. I will put links that can help you but you might will have to do further research. Best results will come up when you google “electro-music.com [my_research]” or

Brazing

Anonymous (anonymous@undisclosed.example.com) — 2017-12-12T18:01:22+00:00

Brazing This page is mostly a place where i dump information i found interesting about brazing. ---------- Victor Oxy-fuel Safety Brass cannot stick to stainless but bronze can. from : Lunettes indice 4 Compares SIF Bronze with RBCuZn-B (from Gasflux C-04 then Aufhauser)

Calibrate your laser printer

Anonymous (anonymous@undisclosed.example.com) — 2017-03-09T17:20:43+00:00

Calibrate your laser printer Why? Your laser printer is not perfect. If you print a big 8“ x 10” rectangle and measure it on the paper, it will not exactly be 8×10. Most of the time it doesn't matter. But if you are printing a drilling guide for mounting holes, or if you are printing a pcb layout that have long footprint (like a slider), then your part won't fit.

cloning_a_hdd

Anonymous (anonymous@undisclosed.example.com) — 2018-01-02T11:47:40+00:00

=====Cloning a HDD===== 1. Boot from any Linux Live CD/ USB key 2. Intall gddrescue sudo apt install gddrescue 3. Open gparted, check the name of the input and output drives (sda, sdb, sdc, etc) 4. Once you know, the only thing you need to do is type in the terminal (replace sdX and sdY by the input and output drive, respectively):

CNC laser build

Anonymous (anonymous@undisclosed.example.com) — 2017-11-08T18:36:34+00:00

CNC laser build Intro I received this for 200$ CAD shipping included, approx. I don't want the laser, just the frame. Laser is built separately, see L-Cheapo lasers build. Assembly Manual They email you doc files and pdf files. The doc files can be converted to pdf using

Collaborative synth

Anonymous (anonymous@undisclosed.example.com) — 2017-03-09T17:30:41+00:00

Collaborative synth Document

configure_mattermost_to_look_like_slack

Anonymous (anonymous@undisclosed.example.com) — 2018-04-08T12:22:30+00:00

If you hate that electric blue from Mattermost that makes you feel you're plugged straight into 110V, follow the instructions here In short, go to your Mattermost “Account Settings” (web or desktop), “display”, “theme”, and copy paste the slack color theme :

Controlling the laser engraver

Anonymous (anonymous@undisclosed.example.com) — 2018-01-28T18:30:55+00:00

Controlling the laser engraver I mainly use the laser for engraving vectors, I have no plan in raster engraving (=pictures), so the instructions and workflow follow this. I do my best to find a workflow that works 100% under Linux. The controlling board uses an Arduino Nano with GRBL 1.1f.

Creality Ender 2 with some mods

Anonymous (anonymous@undisclosed.example.com) — 2019-12-29T08:09:15+00:00

Creality Ender 2 with some mods I bought an ender 2 as it was the only one that would fit inside an Ikea ALEX storage unit. I want to do the following modifications : * Be able to print Nylon. * Make it completely silent. * Have a longer Y axis (approximatively 2 times).

credit-card_size_pomodoro_timer

Anonymous (anonymous@undisclosed.example.com) — 2018-05-17T20:52:41+00:00

credit card size pomodoro timer on off switch connector attiny 556-ATTINY84A-SSU vibration motor 619-28821 green

custom_bike_chainring_on_the_cnc

Anonymous (anonymous@undisclosed.example.com) — 2017-06-09T00:00:31+00:00

Using Openscad To read : What is BCD Custom solidworks file Voir onshape aussi

How to learn eagle

Anonymous (anonymous@undisclosed.example.com) — 2017-03-18T13:03:15+00:00

How to learn eagle A good starting point: Sparkfun's tutorial series installation and setup schematics and board layout for further reading custom parts creation, smd, importing images and…

eurorack_diy

Anonymous (anonymous@undisclosed.example.com) — 2017-03-09T19:38:59+00:00

DIY blank panels for eurorack modules Here you will find some resources and useful information about DIY eurorack modular synthesizer modules. If you want to make your own blank panels for laser / CNC cutting you can use this practical plugin for inkscape that will greatly simplify the drawing of your panel for any dimension.

Fixing .stl files

Anonymous (anonymous@undisclosed.example.com) — 2017-03-18T23:56:09+00:00

Fixing .stl files Someone sent me a .stl files that Cura doesn't like. Here is an easy way to fix the file. * Go to * Scene > Clear scene * File > add (upload your .stl) * In the right menu bar, under Voxel Remeshing, push it to 400 (the bigger the number, the better the quality, the heavier the file).

Flyingbearp902 build

Anonymous (anonymous@undisclosed.example.com) — 2017-04-02T20:28:28+00:00

Flyingbearp902 build Note : I am planning to install a laser on the printer. This document is going to cover the build of the machine AND the installation of a laser on it. Ordered from Canada. Duties were 35.11$ at the door. Came in 14 Days. ----------

fusion360

Anonymous (anonymous@undisclosed.example.com) — 2019-05-06T11:25:42+00:00

Run fusion360 in linux Everything worked, except for what needs to be put in the runFusion360.sh script at the end, i put (where “name” is the username): ---------- #!/bin/bash /opt/wine-staging/bin/wine C:\\\\windows\\\\command\\\\start.exe /Unix /home/

inkscape

Anonymous (anonymous@undisclosed.example.com) — 2017-03-10T17:27:56+00:00

installing_lineageos_on_a_oneplus_x

Anonymous (anonymous@undisclosed.example.com) — 2019-10-14T16:13:16+00:00

* Download TWRP from this link and install it on your phone: and install it on your phone following the instructions on this link, under “installing a custom recovery using fastboot” Then use sideload in TWRP to install the ROM in the first link, then microg then magisk

installing_lineageos_on_a_samsung_s5

Anonymous (anonymous@undisclosed.example.com) — 2019-12-05T08:25:26+00:00

Got this phone 12MP camera good price ---- to know : power+home+volume up = recovery mode power+home+volume down = odin mode/download mode ---- Charge Cellphone ---- Install Odin (Need windows) download TWRP ---- Back to Linux Have to be in developper mode first or adb won't work.

Installing Linux Mint

Anonymous (anonymous@undisclosed.example.com) — 2017-12-31T17:13:49+00:00

Installing Linux Mint Why? Choosing Linux is encouraging a vision where consumers are not forced or trapped. It has a price though: there will be some well known softwares you won't be able to install. It is getting better nowadays, and, one of the ways to encourage companies to make Linux compatible software is by making it part of your workflow. The more people run it, the more developpers will consider making linux versions for their softwares.

kicad

Anonymous (anonymous@undisclosed.example.com) — 2017-07-11T22:16:29+00:00

L-Cheapo lasers build

Anonymous (anonymous@undisclosed.example.com) — 2017-03-15T21:14:49+00:00

L-Cheapo lasers build Designer website : Wiki : Lcheapo 2.7 pcb : inkscape plugin shield or

Links of electronic tools and supplies

Anonymous (anonymous@undisclosed.example.com) — 2017-03-09T17:36:01+00:00

Links of electronic tools and supplies Crimper CDN$ 23,97

Links of shared designs and librairies

Anonymous (anonymous@undisclosed.example.com) — 2017-03-25T22:04:58+00:00

Links of shared designs and librairies Note: If they are not in .stl format, you can always convert them easily online here : And if the .stl doesn't slice correctly in your slicer, check here : Fixing .stl files Community based librairies : Manufacturer based librairies :

OnShape

Anonymous (anonymous@undisclosed.example.com) — 2017-03-29T15:57:30+00:00

OnShape

polyboard

Anonymous (anonymous@undisclosed.example.com) — 2021-02-07T20:29:16+00:00

Polyboard software Fast and error free parametric design. Just type in the sizes and Polyboard draws and updates your project automatically. With instant access to cut lists, drawings of every part and CNC files. Plus full hardware management.

DIY RFID system with RPi

Anonymous (anonymous@undisclosed.example.com) — 2020-11-12T13:58:53+00:00

DIY RFID system with RPi If you're interested to know how this stared, have a look here. This project was supposed to be a generic solution for giving EB members controlled access to lab resources. So far it's working for the laser cutter only, but has some potential to be extended!

rfid_access_system_door_lock_and_laser_cutter_inspiration

Anonymous (anonymous@undisclosed.example.com) — 2020-10-21T10:21:56+00:00

The idea is to build a simple RFID system to control the main door lock and the laser cutter for EB members/staff. Examples: * * *

shapeoko_3

Anonymous (anonymous@undisclosed.example.com) — 2017-03-09T19:39:17+00:00

Arcs and circles milling with bCNC No matter the software or the post processor you use when you do an autoleveling (heightmap) process in bCNC, the software will modify your g-code. This is not a problem for lines but for arcs and circles it will decompose your curves into small segments so it can interpolate and adapt the height of the cutter to your surface. Even if this can be ok for small circles, it may change the shape of your piece in an undesired way. If you don't want this you have to…

Shapeoko 3 feeds and speeds

Anonymous (anonymous@undisclosed.example.com) — 2017-07-31T15:04:32+00:00

Shapeoko 3 feeds and speeds Hi there, Write your feeds and speeds, DOC, lubrification type, tool used, name and date for each material. =) [Acrylic] * FEED 35 IPM, PLUNGE 15 IPM, SPEED 7800 RPM, DOC 0.5mm, LUB : OIL, TOOL : 1/4 2 FLUTES, Greg, 30 JUIN 2017

solvespace

Anonymous (anonymous@undisclosed.example.com) — 2018-08-17T08:50:37+00:00

sprint-layout

Anonymous (anonymous@undisclosed.example.com) — 2019-03-28T19:53:09+00:00

SWIM found that Sprint Layout is the best tool to trace on top of a scan of a pcb and generate Gerbers. According to SWIM plan : * install crossover (try staying in demo forever using command “faketime”) * download Sprint Layout and install using crossover

Welcome to the Eastern Bloc Lab wiki!

Anonymous (anonymous@undisclosed.example.com) — 2021-02-07T20:23:41+00:00

Welcome to the Eastern Bloc Lab wiki! This wiki is intended to be a place where the lab members share their knowledge, tips, or useful links. The Eastern Bloc Lab is a wonderful place where the members can learn by themselves through exchanges and experimentation. Thanks to the wiki, we can now have a place to document projects, and can redirect curious lab members to articles writen by other lab members.

Stepper drivers

Anonymous (anonymous@undisclosed.example.com) — 2017-03-11T18:30:06+00:00

Stepper drivers Silentstepstick TMC2100 vs. Pololu A4988

turning_on_and_off_an_mcu_with_a_momentary_switch

Anonymous (anonymous@undisclosed.example.com) — 2018-04-05T17:17:13+00:00

turning on an MCU with a momentary switch courtesy of Andrew Kilpatrick 21:45 <@elmood> if the circuit doesn't need to be turned off by the switch, you can omit the two diodes 21:45 <@elmood> the theory of operation is this: 21:45 <@elmood> when the MCU is off, the switch powers up the system power rail

unimat_db200_mini_metal_lathe

Anonymous (anonymous@undisclosed.example.com) — 2018-02-10T21:22:22+00:00

buy belt : ---------- make belt : ---------- original hss tool set : ---------- import carbide toolset :

Where to buy 3D printer filament

Anonymous (anonymous@undisclosed.example.com) — 2021-03-31T10:57:57+00:00

Where to buy 3D printer filament (vraiment pas cher, vient sans la bobine)

Where to buy countersinks

Anonymous (anonymous@undisclosed.example.com) — 2017-08-11T09:41:55+00:00

Where to buy countersinks 90deg: 82deg:

Where to buy electronics parts

Anonymous (anonymous@undisclosed.example.com) — 2021-03-31T11:01:33+00:00

Where to buy electronics parts Montreal abra minimum: 50$ shipping: ? addison minimum:? shipping: ? spikenzie labs minimum : no shipping : 7.50$ Online Dipmicro.com is based in Ontario, ships for 3.95$ and has cheap pots, ic sockets, leds, chips, trimmers, headers, wafer connectors, attiny, etc. Free shipping on orders over 20$ using code BERRYPIE

Where to buy metric screws

Anonymous (anonymous@undisclosed.example.com) — 2021-03-31T10:59:16+00:00

Where to buy metric screws Finding metric screws or nuts is hard in Montreal. Here is some adresses and links to help you out. Adresses HARSUPCO 8330 bvd St Laurent (He has everything you need, you name it.) Update 31 mars 2021, now closed ! :(

Where to buy pcbs

Anonymous (anonymous@undisclosed.example.com) — 2017-03-18T09:42:21+00:00

Where to buy pcbs Everywhere. And color pcbs? Here :

Where to buy vinyl in Montreal

Anonymous (anonymous@undisclosed.example.com) — 2017-07-01T10:50:36+00:00

Where to buy vinyl in Montreal * Signmax Tshirt vinyl : “Easyweed stretch”

zeitgeist

Anonymous (anonymous@undisclosed.example.com) — 2018-03-13T21:34:20+00:00

Thread : BOM : ---------- I noticed a small error on the schematic diagram. It has C9 - pin 9 on the delay chip - as 9100nF. Looking at the overlay and photo here it appears that the extra 9 is a typo, it should probably be 100nF. can i use 7805?