Differences

This shows you the differences between two versions of the page.

--- cnc_laser_build [2017/10/29 19:29]
greg created
+++ cnc_laser_build [2017/11/08 18:36] (current)
greg [Configuration]
@@ Line 32: / Line 32: @@
 ===Configuration===
+//Note : Make sure the computer controling the machine have Arduino installed! Otherwise it will display "no serial port found" and you won't be able to connect to the machine.//
 Use [[https://github.com/winder/Universal-G-Code-Sender|Universal G-code controller]] to configure GRBL and jog the machine.
@@ Line 46: / Line 48: @@
   * $120, $121, $122 (acceleration, a.k.a acceleration)
 In our case 2000
+====Hardware upgrade====
+https://cad.onshape.com/documents/961e5bb2646ea790e936ace8/w/438e8d999954f99116762b8b/e/092882d6144619cbeddc5108
+https://www.lulzbot.com/store/parts/nema-17-stepper-motor
+vitre 6mm epais